Infared Sauna Assembly: A General Guide

Assembling an infrared sauna purchased online will vary depending on the specific model and brand you have purchased.  However, I can provide you with a general outline of the steps involved in assembling an infrared sauna.

It's essential to carefully follow the manufacturer's instructions provided with your sauna for the most accurate guidance.

Here's a general guide to help you get started:

1. Unboxing:  Start by unpacking all the components of your infrared sauna, and ensure that you have received all the necessary parts as mentioned in the instruction manual.
2. Location Selection:  Choose an appropriate location for your sauna.  It should be a clean, dry area with enough space for the sauna and proper ventilation. Ensure that you have access to an electrical outlet nearby.
3. Frame Assembly:  Begin by assembling the frame of the infrared sauna. This typically involves connecting the panels, walls, and roof sections according to the provided instructions.  The exact steps may vary depending on the design of your sauna.
4. Electrical Connections:  If your sauna requires electrical connections, carefully follow the instructions to connect the electrical components.  This may involve wiring the control panel, lights, and heaters.  If you're unsure about electrical work, it's advisable to seek professional assistance to ensure safety.
5. Installing Heaters:  Place the infrared heating panels or heaters in the designated locations inside the sauna.  They are typically attached to the walls or ceiling according to the manufacturer's instructions.
6. Securing Panels:  Ensure that all panels are securely attached to the frame and each other.  This step may involve screws, brackets, or other fasteners, depending on the sauna design.
7. Ventilation & Exhaust:  Install any ventilation or exhaust systems as specified by the manufacturer.  This helps maintain air circulation and remove excess heat or moisture from the sauna.
8. Control Panel & Wiring:  Install the control panel in a convenient location inside the sauna, usually near the entrance.  Connect the necessary wiring according to the provided instructions.
9. Bench & Accessories:  Install the bench(es) or seating arrangement as instructed.  Also, you can set up any other accessories that came with your sauna, such as towel hooks, magazine racks, or speakers.
10. Testing & Safety Checks:  Before using the infrared sauna, carefully review the manufacturer's instructions for any safety checks or recommended pre-use procedures.  This may involve verifying the electrical connections, checking for proper ventilation, and ensuring the sauna is in good working condition.

Remember, these steps are a general guideline, and it's crucial to consult the specific assembly instructions provided by the manufacturer for your particular infrared sauna model.  Following the manufacturer's instructions will help ensure a safe and successful assembly process.

Want to check out Upzy's collection of infrared saunas?  Click here.