The PET 650W Electric CARGO TRUCK Trike Tricycle Scooter has 3 wheels and is stable enough to carry passengers or cargo.
This innovative Electric Cargo Truck has a 3' x 4' cargo bed that has a manual tilting bed! Rate loaded at 552 pounds.
Maximum speed is up to 15 mph dependent on load weight. Has a 3-speed throttle with a hill climb gear.
Note: This cargo truck does not need to be licensed as it does not exceed 15mph. The battery charger is portable and just needs to be plugged into a 110V socket.
~ The PET 650W Cargo Truck is on 🔥~
- Part scooter and part truck the Cargo Truck is perfect for work and play
- Three wheels make it stable enough to haul passengers or cargo
- This unit is a direct drive with one low gear for hills.
- Top Distance of 18 miles on a single charge
- Top Speed of 15 mph on a single charge
- The battery can be removed.
- OTHER STORES CHARGE FOR LIFTGATE SHIPPING, WE DO NOT!
Product Specifications:
-
Model: YNSKM(CARGO TRUCK)
-
Max Speed: Up to 15 mph (25 km/h)
-
Distance per charge: Up to 18 miles (30 km
-
Product Size: 108L x 36W x 52H inches
-
Max. capacity: 552 lbs. (250 kg)
-
Net Weight: 395 lbs. (179 KG)
-
Max. steering angle: ≤45°
-
Battey: 48V 20 AH Lead-acid
-
Motor: 48V 650W DC Brushless
-
Power Control: Pure Electric
-
Tires: Front/back 16 x 3.
-
Charging time: 6-8 hours
-
Charger: 48V
-
Voltage: 110V
-
Truck bed: 3x4 ft .folding, manual tilt
Dimensions:
- Overall Dimensions: 108" L x 36" W x 52" H (256 cm L x 85cm W x 123cm H)
- Cargo Bed Dimensions: 3 feet x 4 feet – depth is 4’4″

We adhere to this shipping map. Red states= West Coast shipping price. Blue and Green states= Middle shipping price. Yellow states= East Coast shipping price.
Warranty:
- PET has a 3 month full manufacturer's warranty on batteries and tires.
You can view the owner's manual here.
Cargo Truck Assembly:
This Cargo truck come with all parts needed for assembly. Some of the parts are placed under the seat.
Cargo Truck Maintenance and Assembly Videos:
The assembly instruction for Cargo truck.
1. Take out the Cargo truck from the frame.

2. Take off the carriage and all boards.

3. Place Cargo truck on a flat surface, take out the front fender and front wheel, then assemble them well. And then assemble the front brake cable.

Note: Need to assemble a spacer and two washers on left side of front wheel.

4. Assemble the handlebar and instrument.

5. Assemble the shift lever. Take off two bolts and nuts firstly, and then assemble the shift lever and fasten it with two bolts and nuts.

6. Assemble the carriage. Put the carriage on the frame. Firstly assemble two bolts in the back of the carriage with wrench provided.
Note: Do not tighten the two bolts too tightly.

And then connect the rear lights well and gas spring.


7. Assemble the head board, side boards, rear board and arm rest.
Note: When assembling the head board, firstly assemble two bolts on the front, and then assemble two bolts on the side.
When fastening the bolts, firstly fasten two bolts on the front, and then fasten two bolts on the side too.


8. After installation and before driving, please open the switch(A).

Others instruction:
1. Speed switch

1: low speed
2: high speed
3: middle speed
2. Gear shift: The new Cargo truck has two gears, high-grade and low-grade.
The new Cargo truck has two gears, high-grade and low-grade.
When climbing and very difficult to climb, you can stop the Cargo truck, and then change the low-grade to climb.

Note1: When changing the gears, you must stop the Cargo truck.
Note2: When stopping the Cargo truck, please pull the hand brake.